TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 296 of 352

TM 9-2350-311-34-1

10-3 BLOWER MOTOR ASSEMBLY

This task covers:

a. Removal

b. Installation

General mechanic’s tool kit (item 14, Appx C)

a. Removal

1 Loosen four nuts (1).

2 Turn blower motor assembly (2) counterclockwise to clear bayonet slots (3) and pull straight off coolant heater

body (4).

b. Installation

1 Install blower motor assembly (2) straight onto coolant heater body (4). Turn assembly clockwise to secure

position.

2 Tighten four nuts (1).

10-36