TM-9-2350-311-34-1
HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-1 - Page 53 of 352
TM 9-2350-311-34-1
f.
BILGE PUMP
(2) PUMP OPERATES, BUT DOES NOT PUMP
SUFFICENT WATER
Remove bilge pump from vehicle and check for
clogged inlet screen (para 9-2).
Is inlet screen clogged or obstructed?
Clean inlet screen as required and verify
that problem is solved (para 9-2).
Check for clogged, bent, or damaged hoses.
I
Are hoses clogged, bent or damaged?
WARNING
Compressed air used for cleaning
purposes must not exceed 30 psi (207
kPa). Use only with effective chip
guarding and personal protective
equipment (goggles/shieid, gloves, etc).
1
Blow out hose with low-pressure
compressed air and verify that problem
is solved.
CONTINUED ON NEXT PAGE
3-13
Back to Top
