TM-9-2350-311-34-2
CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-2 - Page 77 of 552
TM 9-2350-311-34-2
Do not attempt to pull or pry on either bonded surface after mating or damage to materiel or equip-
ment may occur.
d. Press mating surfaces together. Use a roller or other suitable tool to ensure full contact between surfaces.
2-17 ELECTRICAL TEST EQUIPMENT AND ELECTRICAL TESTING
To use electrical test equipment refer to TM 9-2350-311-20-2.
2-18 SHAFTS, GEARS, AND BEARINGS
Most gears and bearings are installed on shafts tightly. Use arbor press, gear pullers, or other appropriate tools for removal
and installation. General inspection guidelines for gears and bearings are outlined in para 2-4.1.
2-19 INSTRUCTION AND IDENTIFICATION PLATES
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Artillery field maintenance tool kit
(SC 4933-95-CL-A06)
a. Removal
NOTE
Only replace instruction and identification plates which are damaged or unreadable.
Remove all screws securing instruction or identification plate to mounting surface.
2-15
Back to Top
