TM-9-2520-234-35
POWER TRAIN ASSEMBLY; ALLISON MODEL XTG411-2A
TECHNICAL MANUAL; FIELD AND DEPOT MAINTENANCE MANUAL
JULY 1962
TM-9-2520-234-35 - Page 79 of 323
Figure 22
PAR
4 6
TORQUE PATH S
CHAP
2,
SEC
V
46. TORQUE PATH - NEUTRA L
to pars. 42 and 43, above. Since clutches are
(fig. 22)
not applied, no torque is transmitted beyond
the low- and intermediate-range sun gears.
In neutral, torque is transmitted to the
Some of the range gears rotate freely, but,
turbine shaft through the input transfer gears
since there is no reaction, no torque is trans-
and torque converter (or lockup clutch). Refer
mitted .
4 9
Back to Top
