TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34

  TM-9-2520-238-34 - Page 108 of 319

TM 9-2520-238-34
REPAIR TRANSFER GEARCASES A, B, AND C — Continued
0017 00
27. On gearcase A, straighten tabs on 26 key washers (16). Remove 2 machine screws (17), 26 cap screws (18), and key
washers (16) securing housing cover (19) to gearcase housing (20). Discard key washers.
28.
On gearcase B or C, straighten tabs on 24 key washers(21).
Remove 4 machine screws (22), 24 cap screws (23), and
key washers (21) securing housing cover (24) to housing (20). Discard 24 key washers.
29. Install four cap screws as jacking screws (WP 0033 00, Item 30) in flange of cover (19) or cover (24). Separate cover
from housing (20) by tightening jacking screws evenly. Use longer screws if necessary. Remove and discard cover
gasket (25).
0017 00-10
GEARCASE B AND C


Back to Top