TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 72 of 319
TM 9-2520-238-34
REPAIR COOLING FAN RIGHT ANGLE DRIVES A AND B — Continued
0015 00
16. Determine thickness of shim (10) as follows:
a.
Without installing shim (10), hold bearing retainer housing (11) firmly against bearing outer race in spindle
assembly (1).
b.
With a thickness gauge, measure gap between bearing retainer housing (11) and spindle assembly bearing
housing (7).
c.
Peel new laminated shim (10) to nearest thickness smaller than gap measured in Step 16b.
d.
Remove bearing retainer housing (11) from spindle assembly (1).
0015 00-14
Back to Top
