TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34

  TM-9-2520-238-34 - Page 64 of 319

TM 9-2520-238-34
REPAIR COOLING FAN RIGHT ANGLE DRIVES A AND B — Continued
0015 00
9.
Remove lockwire (1) and cap plug (2) from housing (3). Discard lockwire.
10. Remove packing (4) from cap plug (2). Discard packing.
11. Remove lockwire (5), four cap screws (6), washers (7), and drive A indicator cover (8) or drive B mounting plate (9)
from housing (3). Discard lockwire.
12. Remove packing (10) from drive A indicator cover (8) or drive B mounting plate (9). Discard packing.
13. On drive B only, remove sight indicator (11) and packing (12) from mounting plate (9). Discard packing.
14. Remove pipe plug (13) from housing (3).
15. If inspection indicates identification plate (14) must be replaced, remove four drive screws (15) and identification plate
from housing (3). Discard drive screws. Record identification data for use on new plate before discarding old plate.
0015 00-6


Back to Top