TM-9-2520-238-34
M113A1 FOV, M113A2 FOV, M548 AND M548A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE
TM-9-2520-238-34 - Page 88 of 319
TM 9-2520-238-34
REPAIR COOLING FAN RIGHT ANGLE DRIVE C (M113A3 FOV ONLY) — Continued
0016 00
7.
Measure and record the thickness of bevel gear (6) as dimension C. Use caliper set.
8.
Record Mounting Distance (M.D.) etched on bevel gear (6).
9.
Assemble cartridge assembly (7) as follows:
a.
Install key (8) on shouldered shaft (9), and press bevel gear (6) on shaft. Use arbor press.
b.
Press inner race of bearing (1) on shaft (9). Use arbor press.
c.
Install shaft (9) with bevel gear (6) and inner race of bearing (1) in retaining plate (3).
d.
Install sleeve spacer (5) and peeled shim (4) on shaft (9) in retaining plate (3).
e.
Press inner race of bearing (2) on shaft (9) in retaining plate (3). Use arbor press.
f.
Install key washer (10), new key washer (11), and round nut (12) on shaft (9). Use spanner socket.
g.
Bend tang on key washer (11) into slot on nut (12).
0016 00-10
Back to Top
