TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 103 of 418

TM 9-2520-246-34-1

FRAME 4

1.

Slide fourth and fifth speed shifter shaft (1) through hole in cover (2) as tagged.

Leave hole (3) uncovered.

2.

Slide fork (4) onto shaft (1) as shown.

3.

Put spring (5) and ball (6) into hole (3). Using screwdriver, hold ball down. Slide

shaft (1) over ball and into place.

4.

Ane setscrew hole in fork (4) with setscrew hole in shaft (1). Make sure tab on

fork sets in slot in plate (7). Put in setscrew (8).

5.

Using hammer and drift, tap in expansion plug (9).

6.

Do steps 1 through 5 again for second and third speed shifter shaft (10).

GO TO FRAME 5

2-83