TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 139 of 418

TM 9-2520-246-34-1

d.

Front Output Case Assembly (Model T-136-27).

FRAME 1

1.

2.

3.

4.

5.

6.

7.

Turn transfer assembly (1) as shown.

Take out 10 capscrews (2) and 10 lockwashers (3).

Put back two capscrews (2) into two threaded puller screw holes in flange

of output shaft case (4).

Tighten two capscrews (2) evenly until front output shaft case (4) lifts off

transfer case cover (5).

Carefully lift off output shaft case (4).

Sliding clutch inside output shaft

case may fall out.

Take off gasket (6).

Take out two capscrews (2) and throw away gasket.

Take off shifter shaft spring (7) with two spring caps (8).

END OF TASK

2-119