TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 144 of 418

TM 9-2520-246-34-1

i.

Case Cover.

FRAME 1

NOTE

Case (1) and cover (2) are a matched set. Mark both parts

so that case and cover will not be mixed up with other trans-

mission transfer assemblies being worked on at the same

Soldier A

Soldiers

A and B

time.

Do not

supply

1.

Take

2.

Take

lose or damage three taper pins (3). They are non-

items that will have to be made.

out six capscrews (4) with six lockwashers (5).

out 12 capscrews (6), 12 lockwashers (7), and 12 nuts (8).

3.

Put back two capscrews (4) into two puller screw holes in cover (2).

4.

Tighten two capscrews (4) until cover (2) lifts off case (1).

5.

Pry up and lift off cover (2).

Take out two capscrews (4) and throw away

gasket (9).

END OF TASK

2-124