TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

  TM-9-2520-246-34-1 - Page 190 of 418

TM 9-2520-246-34-1
e.
Rear Output Shaft Assembly.
FRAME 1
1.
2.
3.
4.
5.
6.
7.
Check all bearing cones (1) and bearing cups (2) . Refer to inspection, care
and maintenance of antifriction bearings, TM 9-214.
Check that rear output shaft (3) is not chipped or cracked.
Check that shaft splines (4) are not chipped, cracked, twisted or burred.
Check that sliding clutch (5) is not chipped or cracked and that internal splines
are not twisted.
Check that threads (6) are not stripped or crossthreaded.
Check that gear (7) has no chips or cracks and that gear teeth are not damaged.
Check that key (8) is not chipped or cracked.
END OF TASK
2-170


Back to Top