TM-9-2520-246-34-1
TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C
TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL
JANUARY 1981
TM-9-2520-246-34-1 - Page 38 of 418
TM 9-2520-246-34-1
FRAME 3
NOTE
When input shaft (1) is moved away from mainshaft assembly
(2) some of the 14 pilot roller bearings inside input shaft
may fall into bottom of transmission case (3). They can be
taken out of transmission case after it is taken apart.
1.
Pull input shaft (1) back out of transmission case (3). Using rubber hammer,
tap gear (4) on input shaft forward so that gear is up against front of transmission
case.
GO TO FRAME 4
2-18
Back to Top
