TM-9-2520-246-34-1
TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C
TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL
JANUARY 1981
TM-9-2520-246-34-1 - Page 45 of 418
TM 9-2520-246-34-1
2-5.
DISASSEMBLY OF SUBASSEMBLIES. The following paragraphs give instructions
to disassemble the transmission subassemblies.
a .
Input Shaft Assembly.
FRAME 1
Soldier A 1. Take off snapring (1).
2. Set up input shaft (2) in hydraulic press as shown.
Soldier B 3. Working from under press, hold bottom of input shaft (2) to keep it
from falling when bearing (3) is pressed off. Tell soldier A when ready.
Soldier A 4. Using hydraulic press, press input shaft (2) out of bearing (3).
END OF TASK
2-25
Back to Top
