TM 9-2520-246-34-1
2-39. SHIFT TEST. This
transfer power takeoff for
paragraph gives instructions for testing the transmission
positive shifting.
FRAME 1
1.
2.
3.
4.
NOTE
Turn output shaft (1) after shifting in each position to make
sure it turns freely.
Push shift lever (2) forward.
Clutch sleeve (3) should move forward.
Pull shift lever (2) back until you feel it go into the first detent. Clutch
sleeve (3) should move back.
Pull shift lever (2) all the way back.
Clutch sleeve (3) should move all the
way back.
If transmission transfer assembly (4) does not shift into all three positions or
does not turn freely, do the following:
(a) Disassemble transmission transfer power takeoff. Refer to para 2-33,
frames 1 through 5.
(b) Check that all parts move freely and that there are no damaged parts.
Refer to para 2-35, frame 2.
(c) Assemble transmission transfer power takeoff. Refer to para 2-38,
frames 10 through 13.
END OF TASK
2-377/(2-378 blank)