TM-9-2520-246-34-1

TRANSMISSION MODEL 3053A; TRANSMISSION TRANSFERS MODEL T-136-21 AND MODEL T-136-27; POWER TAKEOFFS MODEL WN-7-28, MODEL WND-7-28 AND MODEL P-136-C

TECHNICAL MANUAL; MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL

JANUARY 1981

TM-9-2520-246-34-1 - Page 391 of 418

TM 9-2520-246-34-1

FRAME 8

1.

Push output shaft (1) back away from dial indicator and set dial to 0.

2.

Pull output shaft (1) forward against dial indicator and note dial reading.

3.

If reading in step 2 is 0.002 to 0.006-inch, take off dial indicator and go to

frame 10.

4.

If reading in step 2 is more than 0.006-inch, go to frame 9.

5.

If reading in step 2 is less than 0.002-inch, do the following:

a.

Disassemble transmission transfer power takeoff. Refer to para 2-33,

frame 5.

b.

Seat bearing cup and assemble transmission transfer power takeoff.

Refer to para 2-38, frame 5.

GO TO FRAME 9

2-371