TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 739 of 933

5. REMOVE COVER (1).

a. Using 3/8-inch drive ratchet handle and

5/32-inch socket wrench attachment,

evenly loosen two screws (2).

b. Remove two screws (2) and

washers (3).

c. Remove cover (1).

CAUTION

Directional control slide and slide bore in

valve are precision fit parts. Do not drop,

scratch, or nick slide. Equipment can be

damaged.

6. REMOVE SPRING (4),

Insert one screw (2) from step 5 in

threaded hole (5).

Pull out directional control slide (6)

retaining ring (7), preformed

packing (8), and spring (4). Discard

packing.

Remove screw (2) from slide (6).

7. USING FLAT-TIP SCREWDRIVER,

REMOVE AND DISCARD RETAINING

RING (9).

8. REMOVE PLUG (10).

GO TO NEXT PAGE

Change 3

4-409

a .

b.

c .

TM 9-2520-270-34