TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 744 of 933

TM 9-2520-270-34

19. INSTALL SPRING (1) IN SLIDE (2).

20. INSTALL SPRING (1) AND SLIDE (2)

IN HOUSING (3).

22. INSTALL RING (5).

a. Position ring (5) with thin rim (6)

facing slide (2).

b, Install ring (5). Using cover (7),

press ring evenly into place.

23. REMOVE COVER (7) AND INSPECT

PREFORMED PACKING (4) FOR

DAMAGE. DO NOT REMOVE RING (5)

FROM HOUSING (3).

a. If preformed packing (4) is damaged,

go to step 24. If not, go to step 27.

CAUTION

Do not damage preformed packing during

installation. Failure of equipment can result.

21. INSTALL NEW PREFORMED

PACKING (4) ON RING (5).

a. Coat new preformed packing (4) with

transmission oil.

b. Install preformed packing (4) in

groove on ring (5).

4-412