TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 753 of 933

8. DISCONNECT HOSE ASSEMBLY (1)

FROM HYDRAULIC ACCUMULATOR (2).

a. Disconnect swivel nut (3) from

adapter (4).

9. REMOVE TWO LOOP CLAMPS (5).

a. Using wire-twister pliers, remove and

discard two Iockwires (6).

b. Using 3/8-inch drive ratchet handle and

5/32-inch socket wrench attachment,

remove bolt (7) screw, (8), and sleeve

spacer (9). Discard screw and bolt.

c. Spread open and pull off two clamps (5).

10. DISCONNECT HOSE ASSEMBLY (10)

FROM FIRST RANGE RELAY VALVE

ASSEMBLY (11).

a. Disconnect swivel nut (12) from

adapter (13).

11. RELEASE HOSE ASSEMBLIES (1)

AND (14) FROM TRANSMISSION

HOUSING (15).

a. Using wire-twister pliers, remove and

discard Iockwire (16).

b. Using 3/8-inch drive ratchet handle,

6-inch extension, and 5/32-inch socket

wrench attachment, remove screw (17),

clamp (18), sleeve spacer (19), and

second clamp (18). Discard screw.

c. Release hose assemblies (1) and (14).

GO TO NEXT PAGE

4-419

TM 9-2520-270-34