TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 758 of 933

TM 9-2520-270-34

-32. INSTALL NEW LOCKWIRE (1);

a. ” Using wire-twister pliers, install tack-

wire (1) through screw (2), around

hose assembly (3), and clkqT$ (4).

35. INSTALL NEW LOCKWIRE (10).

a. Using wire-twister pliers, install

lockwire ,(lO) through screw (9) and

around hose assembly (5) and

clamp (7).

33. SECURE TWO .HOSE

ASSEMBLIES (5) AND (6).

a. Install two clamps (7) and spacer (8).

b. Using 3/8-inch drive ratchet handle,

6-inch extension, and 5/32-inch

I

socket wrench attachment, install

new-screw (9) through clamp (7),

spacer (8), and-second clamp (7).

34. USING 3/8-INCH DRIVE TORQUE

WRENCH, 6-INCH EXTENSION, AND

5/32jNCH SOCKETWRENCH

ATTACHMENT, TQRQUB SCREW (9)

TO 35-45 in-lb (40-52 cmkg).

36. SECURE CLAMP (11) ON HOUSING (12).

a. Install clamp (11) ‘on hose assembly (6).

b. Using 3/8-inch drive ratchet handle

and 5/32-inch socket wrench attach-

1

ment, install new long bolt (13)

through clamp

(ll), spacer (14),

and housing (12).