TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 763 of 933

TM 9-2520-27034:

I

9. CHECK SLIDE (2).

a. Using micrometer caliper set,

8. CHECK SPRING (1).

measure two diameters (3) of

a. Using indicator caliper, measure free

slide (2).

_’

.

length of spring

(I). Replace spring

b. Replace slide (2) if either

if length is less than 0.90 inch

measurement is less than 0.4992 inch

(22.9 mm).

(12.980 mm).

piiiq

/

10. INSTALL PLUG (4).

a. Coat new packing (5) with

transmission oil. :

b. Install packing (5) on plug (4).

I

c. Using 3/8-inch drive ratchet handl,e

and

1/6inch socket wrench

1

attachment, install plug (4).

11. USING

l/2-INCH DRIVE TORQUE

WRENCH WlTH:ADAPTER AND

l/4-INCH SOCKET WREN’CH :

ATTACHM,ENi, TORQUE PLUG (4)

TO- 20-25 ft-lb: (3 mkg).

’

GO TO NEXT PAGE

Change 1

4428