TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 759 of 933

TM 9-2520-270-34

37. SECURE CLAMP (1) ON HOUSING (2).

a. Install clamp (1) on hose assembly (3).

b. Position clamp (1) against housing (2).

Using 3/8-inch drive ratchet handle and

5/32-inch socket wrench attachment,

install new short screw (4) through

clamp and housing.

40. INSTALL HOSE ASSEMBLY (3).

a. Connect swivel nut (7) to adapter (8).

40.1 USING OPEN-END WRENCH, HOLD

HOSE NUT (9).

41. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVELNUT (7) T0

125-135 in-lb (144-155 cmkg).

38. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 5/32-lNCH SOCKET

WRENCH ATTACHMENT, TORQUE

BOLT (5) AND SCREW (4)

TO 35-45 in-lb (40-52 cmkg).

39. USING WIRE-TWISTER PLIERS, INSTALL

NEW LOCKWIRE (6) THROUGH BOLT (5)

AND AROUND HOSE ASSEMBLY (3).

REPEAT FOR SCREW (4).

42. INSTALL HOSE ASSEMBLY (10).

a. Connect swivel nut (11) to adapter (12).

42.1 USING OPEN-END WRENCH, HOLD

HOSE NUT (13).

43. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE SWIVEL NUT (11) TO

125-135 in-lb (144-155 cmkg).

GO TO NEXT PAGE

Change 3

4-425