TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 767 of 933

10. RELEASE HOSE ASSEMBLY (1).

and ring gear (4).

Note if any clearance (5) is not

0.021-0.060 inch (0.533-1-524 mm).

a. Using wire-twister pliers, remove

and discard two Iockwires (2).

b. Using 3/8-inch drive ratchet handle

with extension and 5/32-inch

socket wrench attachment, remove

two screws (3). Discard screws.

11. CHECK CLEARANCE OF RING

GEAR (4).

a. Using feeler gage, measure

clearance (5) between two pads

on each second range brake (6)

b.

TM 9-2520-270-34

GO TO NEXT PAGE

4-433