TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 773 of 933

TM 9-2520-270-34

CAUTION

Do not twist hose assembly when connecting

to elbow. Damage to equipment can occur.

40. CONNECT HOSE ASSEMBLY (1).

a. Connect and hand tighten hose

assembly (1) to elbow (2).

41. USING OPEN-END WRENCH, HOLD HOSE

NUT (3).

41.1 USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-INCH CROWFOOT

TORQUE SWIVEL NUT (4) TO

125-135 in-lb (144-155 cmkg).

42. RETORQUE LOCKNUT (5) ON

ELBOW (2).

a. Loosen locknut (5) on elbow (2) to zero

torque.

b. Hold elbow (2) from turning.

c. Torque locknut (5) to 125-135 in-lb

(144-155 cmkg).

GO TO NEXT PAGE

Change 3

4-438.1 (4-438.2 blank)