TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 781 of 933

TM 9-2520-270-34

19. INSTALL AND SECURE SPRING (1).

a.

b.

c.

d.

Place spring (1) and collar (2) on

rod (3). Install collar with cupped

side up.

Hold piston assembly (4) in place.

Using 9/16-inch open-end wrench,

press collar (2) until pin hole in

rod (3) is visible.

Install pin (5) through hole in rod (3).

Release pressure on spring (1).

20. REPEAT STEPS 18 AND 19 FOR

REMAINING THREE RODS (3) AND

PISTON ASSEMBLIES (4).

END OF TASK

4-445 (4-446 blank)