TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 772 of 933

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing In the front of this

manual.

37. CLEAN BRAKE PADS (2) AND

MATING SURFACES OF SINGLE DISK

BRAKES (3) AND (4), AND SECOND

RANGE BRAKE ASSEMBLIES (5) AND (6).

I

a. Use wiping rag dampened with

36. INSTALL RING GEAR (1).

cleaning solvent.

CAUTION

Do not Install self-locking bolts without

sealing compound. Damge to equipment can

occur.

38. INSTALL BRAKE ASSEMBLIES (5)

AND (6).

a. Coat brake pads (2) with trans-

mission oil.

b. Coat threads of 10 new self-locking

bolts (7) with sealant compound.

c. Install 10 washers (8) and bolts (7).

39. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE 10 BOLTS (7) TO

150-160 ft-lb (21-22 mkg).

4-438

Change 1

TM 9-2520-270-34