TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 764 of 933

TM

9-2520-270-34

12. INSTALL SPRING (1) AND

SLIDE (2) WITH LONG END

FIRST, IN HOUSING BORE (3).

14. INSTALL PLUG (4).

a. Coat new packing (5) with

transmission

oil.

b. install packing (5) on plug (4).

c. Using 3/8-inch drive ratchet handle

and 1/4-inch socket wrench

attachment, install plug (4).

13. CHECK THAT SLIDE (2) MOVES

FREELY IN BORE (3).

a. Push slide (2) in and out of bore (3)

several times.

b. If slide (2) moves freely, go to

step 14. If not, go to step 3.

15. USING 1/2-INCH DRIVE TORQUE

WRENCH WITH ADAPTER AND

1/4-INCH SOCKET WRENCH

ATTACHMENT, TORQUE PLUG (4)

16. REMOVE VALVE ASSEMBLY (6)

TO 20-25 ft-lb (3 mkg).

FROM VISE.

4-430

END OF TASK

Change 1