TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 756 of 933

23. INSTALL FOUR ADAPTERS (1) IN VALVE

ASSEMBLY (2),

a. Coat four new preformed packings (3)

with transmission oil.

b. Install packing (3) on each of four

adapters (1).

c. Install four adapters (1) in housing (2).

24. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE FOUR ADAPTERS (1) TO

125-135 in-lb (144-155 cmkg).

a. Remove housing (2) from vise.

25. CONNECT HOSE ASSEMBLIES (4), (5),

AND (6) TO ADAPTERS (1).

a. Using identification tags (7) for position,

connect swivel nuts (8) to

adapters (1).

b. Remove identification tags (7).

25.1 USING OPEN-END WRENCH HOLD

HOSE NUTS (9).

26. USING 3/8-lNCH DRIVE TORQUE

WRENCH, AND 9/16-INCH CROWFOOT,

TORQUE THREE SWIVEL NUTS (8) TO

125-135 in-lb (144-155 cmkg).

4-422

Change 3

TM 9-2520-270-34