TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 786 of 933

TM 9-2520-270-34

9. INSTALL ELBOW (1) AND PREFORMED

PACKING (2). See task INSTALL ELBOW

(45° AND 90°), page 2-179.

a. Coat new gasket (5) with petrolatum.

b. Position gasket (5) on surface (4) of

accumulator (6).

4-450

Change 3

WARNING

Solvent fumes can burn and

could poison you. Read

warning in the front of this

manual.

10. CLEAN MATING SURFACES (3) and (4)

a. Use wiping rag dampened with cleaning

solvent.

12. INSTALL ACCUMULATOR (6).

a. Mount accumulator (6) on housing (7).

b. Install four new lock washers (8) and

screws (9).

13. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE SCREWS (9)

TO 25-30 ft-lb (3-4 mkg).

11. INSTALL NEW GASKET (5).