TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 795 of 933

TM

9-2520-270-34

8.

TURN TRANSMISSION

CONTROLLER SIDE UP.

CAUTION

Use care when disconnecting linkage.

Attaching parts are small and can fall into

transmission during removal. Damage to

equipment can occur.

9. DISCONNECT CONNECTING LINK (1)

AND SHAFT REVERSE LINK (2).

a. Using 3/8-inch drive ratchet handle

and 3/8-inch socket, remove

self-locking nut (3). Discard nut.

b. Remove bolt (4) and sleeve bushing (5).

Separate links (1) and (2). Discard bolt.

10. REMOVE CROSS SHAFT

ASSEMBLY (6).

a. Remove cross shaft assembly (6) with

link (1) and place on work surface.

11. REMOVE LINK (1).

a.

b.

Using 3/8-inch drive ratchet handle

and 3/8-inch socket, remove and

discard self-locking nut (7).

Remove bolt (8), sleeve bushing (9),

and link (1). Discard bolt.

GO TO NEXT PAGE

4-459