TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 797 of 933

TM 9-2520-270-34

CAUTION

Use care when installing linkage. Attaching

parts are small and may fall into transmission

during installation. Damage to equipment can

occur.

17. INSTALL LINK (1).

a. Install washer (2) link (1), and second

washer (2).

b. Install new cotter pin (3).

18.1 INSTALL LINK (4).

a. Install longer bolt (5), longer sleeve

bushing (6), and link (4) on

housing (7).

b. Install new self-locking nut (8).

19. USING 3/8-INCH DRIVE TORQUE

WRENCH AND 3/8-INCH SOCKET,

TORQUE NUT (8) TO 45-50 in-lb

(52-58cmkg).

CAUTION

Do not contact nut when distorting threads

with wirecutter pliers. Damage to equipment

can occur.

19.1 DISTORT THREADS OF BOLT (5).

a. Using wirecutter. pliers close to nut (8),

distort two threads on two sides of

bolt (5).

20. INSPECT LINK (4).

a.

b.

inspect link (4) for free movement.

If link (4) does not move freely, go to

step 21. if link moves freely, go to

step 23.

17.2

DELETED.

CAUTION

Do not let any hoses rub against link. Damage

to equipment can occur.

18. INSPECT LINK (1).

a. inspect link (1) for free movement.

b. If link (1) does not move freely go to

step 13. if link moves freely, go to

step 18.1.

GO TO NEXT PAGE

Change 3

4-461

17.1 DELETED.