TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 800 of 933

REPAIR CROSS SHAFT ASSEMBLY

DESCRIPTION

This task covers: Disassemble (page 4-464). Assemble (page 4-467).

INITIAL SETUP

Tools:

Arbor press – (Item 3, App C)

Bearing nut wrench — (Item 15, App C)

General mechanic’s tool kit: automotive —

(Item 33, App C)

Machinist’s vise – (Item 47, App C)

Mechanical puller kit — (Item 49, App C)

Micrometer caliper set — (Item 52, App C)

Spring resiliency tester — (Item 91, App C)

Telescoping gage set — (Item 93, App C)

Materials/Parts:

Sealant compound — (Item 11, App B)

Wiping rag – (Item 13, App B)

Materials/Parts: (cont)

Wood block ( 2 ) — (Item 3, App D)

Spring washer ( 2 )

Personnel Required:

Track Veh Rep 63H10

References:

TM 9-214

Equipment Conditions:

Cross shaft assembly on workbench.

See page 4-458.

DISASSEMBLE

1.

REMOVE ROUND PLAIN RETAINING

NUT (1).

a. Secure cross shaft assembly (2) in vise.

b. Straighten bent tang (3) on key

washer (4).

c. Using bearing nut wrench (5), remove

nut (1).

TM 9-2520-270-34

4-464

Change 3