TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 785 of 933

TM 9-2520-270-34

5. REMOVE HYDRAULIC

ACCUMULATOR (1).

a. Remove four screws

washers (3). Discard

b. Lift out accumulator

(2) and lock

lock washers.

(1).

c. Remove and discard accumulator

housing gasket (4).

6. REMOVE ADAPTER (5) AND

ELBOW (6).

Unscrew adapter (5).

Remove and discard preformed

packing (7).

Unscrew elbow (6).

Remove and discard preformed

packing (8).

7.

8.

INSTALL ADAPTER (5).

a. Coat new preformed packing (7)

with transmission oil.

b, Install packing (7) on adapter (5).

c. Install adapter (5) in accumulator (1).

USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 9/16-lNCH CROWFOOT,

TORQUE ADAPTER (5) TO 125-135 in-lb

(144-155 cmkg).

GO TO NEXT PAGE

4-449

a.

b.

c.

d.