TM-9-2520-272-34P

CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A

TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

TM-9-2520-272-34P - Page 181 of 488

TM 9-2520-272-34&P

4-20.

REPAIR RIGHT END COVER COMPONENTS

(SHEET 4 OF 14)

FOLLOW-ON PROCEDURE: Install left brake apply

shaft. Refer to paragraph 4-21.

End of Task 3

TASK 4. REPAIR RIGHT BRAKE SUPPORT ASSEMBLY

COMMON TOOLS:

Adapter, socket wrench, 1/2 to 3/8 inch square drive

Chisel, cold

Extension, socket wrench, 3/8 inch square drive, 6 inch

Gloves, leather

Gun, heat (2 required)

Hammer, hand, ball peen

Handle, socket wrench, 3/8 inch square drive

Press, arbor, hand operated

Pry Bar, roller head (2 required)

Puller, mechanical, slide hammer type

Rotary Tool Kit, electric (grinder)

Socket Wrench Attachment, socket head screw, 3/8 inch square drive, 3/16 inch hex plug end

Tap Set

Wrench, torque, 0-175 ft-lb

SUPPLIES:

Blocks, wooden, 2 x 4 inches x 16 inches long (2 required) (Item 2, Appendix C)

Carbon Dioxide, technical (dry ice) (Item 4, Appendix C)

Lubricating Oil (Item 10, Appendix C)

Petrolatum (Item 14, Appendix C)

Rag, wiping (Item 15, Appendix C)

Sealant, lubricating, thread locking (Item 16, Appendix C)

PERSONNEL REQUIRED: 2

One soldier holds brake support steady.

One soldier removes bearing races.

Go to Sheet 5

Para. 4-20, Task 4

Change 1 4-115