TM-9-2520-272-34P

CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A

TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

TM-9-2520-272-34P - Page 465 of 488

TM 9-2520-272-34&P

APPENDIX D

ILLUSTRATED LIST OF MANUFACTURED ITEMS

This appendix contains the instructions for making the simple tools used in some maintenance

tasks. The tasks requiring the use of these tools have the tool listed under the heading

FABRICATED TOOLS. The tools shown in this appendix are listed in paragraph number order.

Para. No.

Title

Fabricated Tool

4-8

Remove Left End Cover Assembly

Make fixture from

1/4 x 1-inch steel bar

stock. Grind off burrs

and sharp corners.

Material: Steel

4-14

Install Converter Element Components

Make guide pin by cutting

head off 5/16-18 x 3-inch

bolt. Cut 1/16-inch slot

for screwdriver. Grind

off all burrs.

Material: Steel

D-1