TM-9-2520-272-34P

CROSS DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4 & 4A

TECHNICAL MANUAL; INTERMEDIATE, DIRECT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

TM-9-2520-272-34P - Page 466 of 488

TM 9-2520-272-34&P

Para. No.

Title

Fabricated Tool

4-15

Install Left End Cover Assembly

GUIDE PIN

Make guide pin by cutting

head off 3/8-16 x 4-inch

bolt. Cut 1/16-inch slot

for screwdriver. Grind

off all burrs.

Material: Steel

4-18

Install Transmission Top Components

GUIDE PIN

Make guide pin by cutting

head off 5/16-18 x 3-inch

bolt. Cut 1/16-inch slot

for screwdriver. Grind

off all burrs.

Material: Steel

4-23

4-29

Repair Center Housing Components

Make spacer from same part

number insert as the one to

be removed:

9425029

5/16-18 thread

9425031

3/8-16 thread

23018271 1/1-13 thread

Cut a 3/8 inch (10 mm) long

section from the undrilled end

of the insert. Screw the cut

off section onto a bolt and

grind off the external threads.

Material: Steel

D-2/D-3 deleted

Change 1