TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 455 of 620
TM 9-2520-272-40
0056
INSTALL RANGE PACK
1. Install new seals (Figure 18, Item 49) and (Figure 18, Item 50) onto f rst clutch piston (Figure 18, Item 48).
Apply petrolatum to seals (Figure 18, Item 49) and (Figure 18, Item 50).
2. Using seal inserter and remover, install inserter and remover (Figure 19, Item 51) into center housing.
3. Mark outer piston face with black tube-type marker across from tang. Mark range bore above slot in center
housing. This will help locate f rst clutch piston (Figure 18, Item 48) in center housing.
4. Hold cross members on f rst clutch piston (Figure 18, Item 48) at two points, 180 degrees apart and install f rst
clutch piston (Figure 18, Item 48) into center housing. Align the tang on piston with the slot in center housing.
5. Remove seal assembly inserter and remover (Figure 19, Item 51).
Back to Top
