TM-9-2540-207-14-P

HEATER, VEHICULAR COMPARTMENT, MODEL: A20

TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2007

TM-9-2540-207-14-P - Page 159 of 288

TM 9-2540-207-14&P

5-115

5.10.2 Fuel Injector

Figure 5.10-4.

Fuel Injector.

5.10.2.1 Removal

1.

Remove vehicle power cable from the MS Power connector.

2.

Remove Top Cover (ref. 5.4.1).

3.

Rotate the Fuel Injector so that the wiring connector is facing upwards.

4.

Remove the fuel injector J5 connector.

Note: Use fingers to press the metal clip connector, and release

TOWARDS the fuel injector. Gently detach connector from Fuel

Injector.

5.

Using an 8-32 hex socket remove the bolts from the side of the fuel manifold.

6.

Lift the manifold and injector by gently pulling away from the top housing assembly.

7.

The injector can now be removed.

5.10.2.2 Installation

1.

Insert the Fuel Injector into the fuel boss of the Top Housing, and the other end of the

Fuel Injector into the fuel manifold.

The wiring connector of the Fuel Injector should be

angled upwards and towards the fuel boss of the Burner Fan Plate Assembly.

P5 Power

Fuel Injector Connector