TM-9-2540-207-14-P

HEATER, VEHICULAR COMPARTMENT, MODEL: A20

TECHNICAL MANUAL; OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2007

TM-9-2540-207-14-P - Page 160 of 288

TM 9-2540-207-14&P

5-116

Fuel Injector (continued)

Note: Apply GAA to fuel injector o-rings prior to installation.

2.

Apply Loctite 243 to the two bolts and using an 8-32 hex socket, secure the fuel manifold

to burner plate.

3.

Connect fuel injector to J5 connector.

4.

Rotate the injector so that the connector is pointing downwards, toward the burner

motor.

5.10.3 Burner Fan Driver Board (Design Iteration 3)

Figure 5.10-5.

Burner Fan Driver Board.

Design Iteration 3

5.10.3.1 Removal

1.

Remove Top Cover (ref. 5.4.1).

Screw

Diagnostic Display

and Logic Board

Threaded Hex

Standoff

P1 Power

Logic Board