TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 146 of 670

TM 9-2815-202-34

4-12. FUEL PUMP REPLACEMENT (Cont)

(12) Lubricate drive shaft (5) with clean engine oiI. lnsert square end of drive shaft (5) from gear

side of fuel pump body (8) through oil seals (20).

NOTE

If driven gear assembly is chamfered, install gear facing fuel pump body. If driven gear

assembly has a slot, install gear so slot faces pump body cover.

(13)

(14)

(15)

(16)

Install driven gear and shaft assembly (12) in fuel pump body (8).

Lubricate gears and shafts with clean engine oil.

Apply a very thin coat of sealant on pump body cover (7) surface. Do not allow sealant to

enter gear compartment.

Aline fuel pump body (8) with pump body cover (7). Secure with four bolt and Iockwasher

assemblies (6).

4-44