TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 148 of 670

TM 9-2815-202-34

4-13. AIR INLET HOUSING REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

MODELS

EXPENDABLE/DURABLE SUPPLIES

7083-7395 7083-7396

Cleaning solvent (App C, Item 10)

7083-7398 7083-7399

EQUIPMENT CONDITION

TOOLS AND SPECIAL TOOLS

Para Description

General mechanics tool kit (App B, Item 96)

4-2

Air inlet tube removed (7083-7395)

Torque wrench (App B, Item 101)

4-10

Air box heater removed (7083-7395 and

7083-7396)

I

5-2 Air inlet tube removed (7083-7396)

MANDATORY REPLACEMENT PARTS

6-3 Air inlet tube removed (7083-7398)

3 Lockwashers (App F, Item 93)

1 Gasket (App F, Item 23)

a. Removal

(1)

Remove three bolts (1), three flat washers (2), and three Iockwashers (3) securing air inlet

housing (4) and gasket (5) to blower. Remove air inlet housing and gasket. Discard

Iockwashers and gasket.

NOTE

For models 7395 and 7398 only.

(2)

If necessary, remove pipe plugs

(6

and 7) from air inlet housing (4).

b. Cleaning/Inspection

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective

goggles and gloves and use only in a well-ventilated area. Avoid contact

with skin, eyes, and clothes. Don’t breathe vapors. Do not use near open

flames or excessive heat. The flash point is 100

o

F-138

o

F (38°-50

o

C). If

you become dizzy while using cleaning solvent, get fresh air immediately

and get medical aid. If contact with eyes is made, wash your eyes with

water and get medical aid immediately.

(1) Clean air inlet housing with cleaning solvent.

4-4 6 Change 1