TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 156 of 670

TM 9-2815-202-34

4-16. BLOWER DRIVE SHAFT AND HUB REPLACEMENT (Cont)

(4) Examine spring plates. Replace if cracked, kinked, or if bolt holes show signs of distortion.

d. Assembly

Attach two spring plates (17) to blower drive hub (18) using three bolts (16). Torque bolts to

35-39 Ib-ft (47-53 N-m).

e. Installation

(1) Attach drive hub and spring plate assembly (14) to blower drive gear (15) using three bolts

(13). Torque bolts to 35-39 lb-ft (47-53 N-m)

(2) Insert 10-32 x l-inch bolt (10) in blower drive shaft (1 1).

4-54