TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 171 of 670

TM 9-2815-202-34

c.

Installation

(1)

(2)

(3)

(4)

(5)

(6)

Install access cover (2), gasket (3), and two self tapping bolts (1) to assembly cover (4).

Torque bolts to 13-17 Ib-ft (18-23 N-m).

NOTE

Assemble top three bolts with nuts toward front of engine.

Install assembly cover (4) and gasket (16) to block. Secure with five bolts (5), five flat

washers (8), five Iockwashers (14), and four nuts (6). Torque bolts to 30-35 Ib-ft (41-47 N-m).

Install bolt (5), Iockwasher (7), and jam nut (9). Torque bolt to 30-35 Ib-ft (41-47 N-m).

Install bolt (10), Iockwasher (11), and flat washer (12). Torque bolt to 71-75 Ib-ft

(96-102 N-m).

Install two bolts (13), two Iockwashers (7), and two flat washers (8). Torque bolts to

30-35 Ib-ft (41-47 N-m).

Install bolt (14) and flat washer (15). Torque bolt to 137-147 Ib-ft (186-200 N-m).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

4-9

Water pump installed

4-7

Front lifter bracket installed

4-5

Install fuel strainer bracket

4-69