TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 555 of 670

TM9-2815-202-34

8-2. ENGINE PREPARATION FOR START-UP (Cont)

(4) Disconnect lubricator hose and install oil gallery

(5) Install rocker arm covers.

(6) Check and fill crankcase to proper level.

CAUTION

plug.

Prelubricate any stored or repaired engine prior to start-up. Oil gallery and associated

components will have insufficient oil during the time Iag following start-up. Bearing

damage from lack of lubrication could result.

c. Prelubrication of Oil Gallery (Without Pressure Lubricator)

(1) Remove rocker arm covers.

(2) Pour lubricating oil on rocker arm assemblies.

(3) Install rocker arm covers.

(4) Check and fill crankcase to proper level.

d. Prelubrication of Turbocharger

(1)

(2)

(3)

Disconnect oil supply line at turbocharger bearing (center) housing.

Fill bearing housing cavity with oil while rotating assembly by hand to coat internal bearing

surfaces with oil.

Connect turbocharger oil supply line.

8-3