TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

TM-9-2815-202-34 - Page 564 of 670

TM9-2815-202-34

8-6. GOVERNOR GAP ADJUSTMENT

h.

■

i.

j.

For all models except 7083-7391. remove

(Cont)

two bolts (21) and two lockwashers

-

(22)

securing bracket (23) to support (24).

For all models except 7083-7391, remove

two screws (25) and four flat washers (26)

and move bracket (23) away from governor

cover (27).

For all models except 7083-7391, remove

remaining six screws (25) from governor

cover (27). For model 7083-7391, remove

eight screws (25) from governor cover.

Remove cover and gasket (28). Discard

gasket.

•

•

•

WARNING

Avoid contact with hot

manifolds, pulleys, and

other moving parts to avoid

personal injury.

Wear proper ear protection

when running engine. Noise

volume of engine can cause

hearing loss or injury.

Protective turbocharger air

inlet shield must be

installed prior to doing

maintenance when engine is

running and air inlet has

been removed. Contact with

rotating blades will cause

injury to personnel.

8-12 Change 1