TM-9-2815-202-34
ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
FEBRUARY 1990
TM-9-2815-202-34 - Page 620 of 670
TM9-2815-202-34
NOTES: To reduce 24 V dc to 18 V dc.
1. Cut a piece of 12-gage wire 6 inches long.
2. Cut a piece of 12-gage wire 12 inches long.
3. Cut a piece of 1-inch diameter rubber hose 7 inches long.
4. Attach a test clip to one end of 6 and 12 inch long 12 gage wire.
5. Drill a hole through end of two No. 2 K plugs in order to insert 12-gage wire through.
6. Insert one lead through hole in plug and connect to 50-watt resistor. Insert in rubber hose and
attach other lead to resistor.
FIGURE D-1 . TEST LEAD (P/N 12384626)
D-2
Back to Top
