TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013
TM-9-2815-205-24

  TM-9-2815-205-24 - Page 508 of 856

ITEM 1 - CYLINDER HEAD PRESSURE TESTING KIT
1.
Fabricate end plate from 3/8-inch thick steel plate, (Figure 1, Item A).
2.
Fabricate gasket for end plate from 1/8-inch thick rubber material except with 0.5-inch diameter hole in
center.
3.
Quantity required: One each.
4.
Additional items:
Two bolts (3/8-16 x 1)
5.
Fabricate blocking plates from 3/8-inch thick steel plate, (Figure 1, Item B).
6.
Fabricate gaskets for blocking plates from 1/8-inch thick rubber material.
7.
Quantity required: Four each.
8.
Additional items:
Eight bolts (5/8-11 x 6)
16 flat washers (5/8)
Eight nuts (5/8-11)
9.
All dimensions are in inches.
Table 1.
Bulk Material
ITEM
NO.
NAME
QTY
1
Rubber gasket material 4.4 x 2 x 3/8 in.
1
2
Rubber gasket material 6.2 x 2 x 3/8 in.
4
3
Steel plate 4.4 x 2 x 3/8 in.
1
4
Steel plate 6.2 x 2 x 3/8 in.
4
TM 9-2815-205-24
0081
0081-2


Back to Top