TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 500 of 856
DRAINING - Continued
NOTE
Models 5063-5393 and 5063-539L, have no coolant drain at thermostat housing.
5.
Open drain cock (Figure 6, Item 16) and drain coolant from thermostat housing (Figure 6, Item 17).
16
17
MAINT_226A
Figure 6.
Thermostat Drain.
6.
After coolant is drained, close drain cocks (Figure 4, Item 13), (Figure 3, Item 12), and (Figure 6, Item 16).
Install plugs in bottom of transmission cooler (Figure 5, Item 15) and engine cooler (Figure 3, Item 11).
NOTE
In model 5063-5299, oil filter is remote mounted in the vehicle.
7.
Remove plug (Figure 7, Item 19) in bottom of oil filter housing (Figure 7, Item 20) and drain oil into a
separate container. Replace plug. For models 5063-5393 and 5063-539L, remove spin-on oil filter
(Figure 7, Item 18) with oil filter wrench. Discard filter.
18
19
20
MODELS
5063-5393
5063-539L
MAINT_227
Figure 7.
Oil Filter Draining.
TM 9-2815-205-24
0079
0079-6
Back to Top
