WARNING SUMMARY - Continued
GENERAL SAFETY WARNINGS DESCRIPTION - Continued
WARNING
Hot metal components dissipate heat quickly. Wear heat-resistant gloves when handling
heated parts. If you receive burns, immerse burn in cold water and seek medical aid.
Failure to comply may result in injury to personnel.
WARNING
A protective shield must be installed on turbocharger inlet prior to running engine without
built-in inlet screen or air cleaners. The turbocharger creates a strong suction at high
engine speeds and can pull hands or clothing into spinning blades. Failure to comply may
result in injury to personnel.
WARNING
Use care when using a press. Improper tools or tools not properly aligned may cause injury
to personnel or damage to parts or equipment. Failure to comply may result in injury to
personnel and/or damage to equipment.
WARNING
Components of this engine are heavy and awkward to handle. Use correct lifting
procedures, indicated lifting devices, and/or assistance from other personnel. Failure to
comply may result in injury to personnel.
TM 9-2815-205-24
e