TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 689 of 968

TM 9-2815-210-34-2-2

FRAME 3

Soldier A

Soldier B

1.

2.

3.

4.

5.

Lift front cylinder head (1) so it hangs over engine block (2).

CAUTION

GO TO FRAME 4

Make sure front cylinder head (1) is positioned direct-

ly above front cylinder head mating surface of engine

block (2) .

Lower cylinder head slowly and evenly onto

mating surface and guide cylinder head onto cylinder head

studs (3) .

Failure to use extreme caution may result in

damage to cylinder head and cylinder head mounting studs.

Guide front cylinder head (1) onto cylinder head mounting

studs (3).

Lower front cylinder head (1) onto engine block (2).

Do frames 2 and 3 again for rear cylinder head (4).

Check whether cylinder block (2) has special identification mark

(5) .

5-60